Custom Battery Cables Home
Battery Cables for Cars, Trucks and Jeeps:
F150 & Bronco
1987-99 F250 & F350
1999-2003 F250 & F350
Jeep Cherokee and Grand Cherokee
Willys and Military Jeeps
1994 - 1998 Dodge Ram 2500/3500 5.9L Cummins
1998 - 2002 Dodge Ram 2500/3500 5.9L Cummins
2003 - 2007 Dodge Ram 2500/3500 5.9L Cummins
2007 - 2009 Dodge Ram 2500/3500 6.7L
Project Snow Leopard FJ dual battery set
Battery Cables for Other Applications:
2 gauge Golf Cart Cables
2/0 Cables for Solar Battery Banks
Braided Ground Cables
Booster (Jumper) Cables
Made-To-Order Custom Battery Cables:
Accessories, parts and tools:
NOCO Genius Wicked Smart Chargers
Battery and Cable Accessories
Battery Cable Repair Kits
Buy Wire, Terminals, Lugs, Heat Shrink and Tools
Clearance and discount cables.
Technical Info and Other Useful Stuff:
Do You Need New Cables?
Battery Cable Tips and Tricks
Different types of Cable Ends
Different Wire Types
What size cable do you need?
Wire size, thickness, amperage
How we assemble cables
Beware of PayPal Scams
Parts. Just Parts...
just want to buy parts and assemble cables themselves. Using
the links below
you can purchase wire, battery terminals and lugs. We stock a
larger variety of battery cable lugs than any of the large auto
parts chains. I don't have all
the various wire, terminals and lugs that we have in stock on the page yet, but the most
common are listed. I'm adding more to our inventory all the
time so if you don't see what you
want please email me. I may have it in stock and just not yet
manufacturer of the ends recommends crimping as the best
way to attach ends. If done right, with good equipment, the
crimp is so tight that there is no air gaps and no room for the solder.
I offer a few styles of crimpers. I don't really recommend the
cheap hammer style crimpers, but they'll do the job if you're not too
picky. They also seem to "wear out" and start binding after
Soldering is tough on the insulation and the solder wicks up the
wire destroying the flexibility.
requires flux, hazardous lead solder and solvents (for cleaning the flux).
I've also heard soldering
can crack between end and wire. However, I've soldered ends in the
past and I've never experienced any problems. I also
have some excellent solder for sale if you need it. email for
spec'ed by wire gauge. (see Technical data
for what the sizes mean). Battery terminals are also specs as
positive or negative (positive is slightly larger). Lugs are
also spec'ed by bolt hole size.
Because of the large
number of parts, I've split this page into several categories...
Click on the part category to expand the list.
#8, 6, 4, 2, 1/0, 2/0
3/0 and 4/0 gauge, Red or Black, SGT, SGX (hi temp),
marine battery cable and #12, 10 or 8 gauge fuse link
Top post (Straight, Elbows
and Flag), Side Post/Stud Top, including Extra Wire
Battery Terminals and Adapters.
Standard Ring Terminals,
Splices and Heavy Duty Lugs and including 45 and 90
Top Post, Side Post,
Flag, Elbow, Starter Lug, and Alternator covers.
Long or Short Handle and Hammer Crimpers
Heat Shrink, Wire Ties and Loom:
Adhesive-Lined Heat Shrink: Tough outer jacket
protects against abrasion, vibration, and flexing. The
adhesive (like hot glue) seals out dirt, moisture and
chemicals. 3:1 Shrink Ratio. Prices are
for a 12 inch piece.
Convoluted Split Loom (Black Poly):
is per foot. Add to cart then select quantity
For more accessories go